Table of Contents
Advertisement
Bosch Rexroth AG
Mounting, demounting and electric installation
Fig. 10-7: Clamp fastening
4. Tighten the clamping screws.
NOTICE
Tighten the screws and nuts with the corresponding mounting torque according
to the following table.
Thread
M2,5
M3
M4
M5 (clamping screws)
Tab. 10-1: Mounting torques
26/49
Mechanic damage due to incorrect mounting
torque.
Mounting torque
0.4 Nm
0.7 Nm
1.4 Nm
1.0 Nm
VEP 07.6/15.6 Multi Touch
DOK-SUPPL*-VEPXX.6MTHU-IT01-EN-P
- Quick Links:
- Interfaces
- Ethernet Interfaces
- Commissioning
Hide quick links:
Advertisement
Table of Contents
