VEP 07.6/15.6 Multi Touch
14.3 Cleaning notes
NOTICE
Do not use solvents
●
Do not use high pressure cleaning device
●
14.4 Regular maintenance tasks
Check all plug and terminal connections of the components for proper tight-
●
ness and possible damage at least once a year
Check that no cables are broken or pinched
●
Replace damaged parts immediately
●
14.5 CMOS battery
The VEP xx.6 devices are provided with a lithium battery (refer to the following
figure) to buffer the real-time clock in the BIOS. If this battery is empty or weak,
the clock setting is lost in the BIOS.
Fig. 14-1: Button cell with cable
To avoid this, replace the battery every five years.
WARNING
Do not load, remove, destroy, burn or heat batteries over 100 °C. Dispose old
batteries immediately and properly. Keep away from children!
Use only the battery specified in
page 6
Battery exchange in the built-in device
At the built-in device, the battery is installed in the PC box on the rear side of
the device.
DOK-SUPPL*-VEPXX.6MTHU-IT01-EN-P
Dissolving front glass sealing with solvent!
Batteries can cause fire, explosions or chemical
burn.
by Bosch Rexroth.
Wire black (-)
Pin 2
Pin 1
Wire red (+)
chapter 5.2 "Lithium battery" on
Bosch Rexroth AG
Maintenance
39/49