Clean The Printhead Cam Rollers - Entrust Datacard Retransfer Series Cleaning Manual

Retransfer Series Printers
Replace the Cleaning Sleeve (cont.)
5. Remove the protective wrapper from the cleaning sleeve and
discard it.
Protective
Wrapper
6. Replace the cleaning spindle in the C3 slot in the printer.
C3
7. Replace the ink ribbon cartridge in the printer and close and lock the
printer access door.
16

Clean the Printhead Cam Rollers

Use the adhesive cleaning card to clean the printhead cam rollers.
1. Power off the printer.
2. Remove the retransfer film (C2) cartridge from the printer (refer to
"Before You Begin" on page
3. Peel off the center and both side strips from one side of the adhesive
cleaning card.
4. Insert the cleaning card vertically into the printer between the
retransfer cartridge guidepost and the rollers. Make sure that the
adhesive side of the card faces to the right and touches the rollers.
5. Move the cleaning card up and down along the rollers to remove any
debris.
Move the cleaning
card up and down
Ink Ribbon
Cartridge
6. Replace the retransfer film cartridge. Close and lock the access door
and restart the printer.
7. Discard the used cleaning card.
527983-001_B 527983-001_B
6).
Peel Off Center
and Both Side Strips
Adhesive
Cleaning Card
Printhead
Cam Rollers
Guidepost
Cleaning Guide
17