Table of Contents
Advertisement
2-5 Motherboard Installation
All motherboards have standard mounting holes to fit different types of
chassis. Make sure that the locations of all the mounting holes for both
motherboard and chassis match. Although a chassis may have both plas-
tic and metal mounting fasteners, metal ones are highly recommended
because they ground the motherboard to the chassis. Make sure that the
metal standoffs click in or are screwed in tightly. Then use a screwdriver
to secure the motherboard onto the motherboard tray.
Philips Screwdriver (1)
Tools Needed
JPME2:
1-2:NORMAL
2-3:ME MANUFACTURING MODE
JD1:SPEAKER:1-4
JWD1:WATCH DOG
1-2:RST
2-3:NMI
BT1
JSTBY1:
5V STBY POWER
BIOS
LED1
I-SATA2
I-SATA4
I-SATA3
I-SATA5
Location of Mounting Holes
Attention! 1) To avoid damaging the motherboard and its com-
ponents, please do not use a force greater than 8 lb/inch on each
mounting screw during motherboard installation. 2) Some compo-
nents are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the
motherboard to the chassis.
Philips Screws (8)
HD AUDIO
JI2C1/JI2C2
ON :ENABLE
SYS_FAN2
OFF:DISABLE
MH12
2280
J9701/J9702
1-2:NORMAL
2-3:DEBUG MODE
MH11
2260
MH10
2242
PCI-E M.2-M1
BAR CODE
I-SATA0
I-SATA1
MAC CODE
USB7
(3.0)
USB2 (2.0)
(3.1)
USB
5/6
LAN
J9702
SYS_FAN1
JPW1
2-11
Chapter 2: Installation
Standoffs (8)
Only if Needed
KB/MOUSE/USB 0/1(2.0)
JPUSB1
JPUSB1:USB0/1 WAKE UP
1-2 ENABLE
2-3 DISABLE
DIMMA1
DIMMA2
DIMMB1
DIMMB2
A
Advertisement
Table of Contents
