Table of Contents
Advertisement
PEG1/2 Max Payload size
This feature controls the max payload size for this port. The options
are Auto, 128, and 256 TLP.
PEG 0:6:0
Enable Root Port
Select Enable to activate the Root Port. The options are Disabled,
Enabled, and Auto.
Max Link Speed
Select Auto, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
Program PCIe ASPM after OpROM
This feature enables PCIe ASPM programming after OpROM. The
options are Disabled and Enabled.
VT-d
This feature enables VT-d. The options are Disabled and Enabled.
GNA Device
This feature enables the SA GNA device. The options are Disabled
and Enabled.
X2APIC Opt Out
This feature enables X2APIC Opt Out. The options are Disabled and
Enabled.
PCH-IO Configuration
PCI Express Configuration
DMI Link ASPM Control
This feature enables Active State Power Management (ASPM) for
the DMI Link. The options are Disabled, L0s, L1, L0sL1, and Auto.
Peer Memory Write Enable
This feature enables Peer Memory Writing. The options are Disabled
and Enabled.
4-11
Chapter 4: AMI BIOS
Advertisement
Table of Contents
