Supermicro C7C242-CB-M User Manual page 30

Supermicro C7C242-CB-M/MW Motherboard User's Manual
Installing a CPU Heatsink
1. Apply the proper amount of thermal grease to the heatsink.
2. Place the heatsink on top of the CPU so that the four mount-
ing holes on the heatsink are aligned with those on the retention
mechanism.
3. Tighten the screws in the following order:
Screw #4
4. Once the screws are tightened, plug the power cord into the
CPU_FAN1 connector.
Note: Screw #1 is not shown in the illustration.
Note: Graphic drawings included in this manual are for reference
only. They might look different from the components installed in
your system.
Screw #2
2-6
Screw #3