Table of Contents
Advertisement
Console Redirection Settings
Redirection COM Port
This feature specifies which COM port to display Legacy OS and Legacy
OpROM redirection messages to. The default is COM1.
Legacy OS Redirection Resolution
This feature controls the number of rows and columns supported by
Legacy OS redirection. The options are 80x24 and 80x25.
Redirection After POST
When this feature is set to Always Enabled, Legacy Console redirection
will be enabled for legacy operating systems. The default is Always
Enabled.
Serial Port for Out-of-Band Management/Windows Emergency
Management Services (EMS)
The submenu allows the user to configure Console Redirection settings
to support Out-of-Band Serial Port management.
Console Redirection
Select Enabled to use a COM port selected by the user for EMS Console
Redirection. The options are Disabled and Enabled.
*If the item above is set to Enabled, the following features will become
available for user configuration:
Console Redirection Settings
Out-of-Band Mgmt Port
The feature selects a serial port in a client server to be used by the
Windows Emergency Management Services (EMS) to communicate
with a remote host server. The options are dependent on the avail-
able COM ports.
Terminal Type
Use this feature to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII character set. Select
VT100+ to add color and function key support. Select ANSI to use the
extended ASCII character set. Select VT-UTF8 to use UTF8 encoding
to map Unicode characters into one or more bytes. The options are
ANSI, VT100, VT100+, and VT-UTF8.
4-15
Chapter 4: AMI BIOS
Advertisement
Table of Contents
