10.4
Installing the remote Bell Alarm reset
Can only be used with automatic reclosing lockout reset.
The remote reset coil will otherwise be overloaded and damaged.
10.4.1 Mounting remote reset coil and cut-off switch
Hazardous voltage.
Will cause death, serious personal injury, or equipment damage.
Turn off and lock out all power supplying this equipment before working on this device.
High speed moving parts.
Can cause serious personal injury.
Discharge the closing spring before inspection and before carrying out any work on the circuit breaker.
- OPEN the circuit breaker and discharge the closing spring
- Move the circuit breaker into the withdrawn position in the cradle
- Remove front panel
- Remove the trip unit
10 – 5
DANGER
WARNING
(page
24-4).
(page
9-49).
NOTICE
(page
24-2).
(page
24-3).