Siemens UL 489 Operating Instructions Manual page 250

Installing the locks
The way in which the locking module unit is installed is the same whether the unit consists of one lock or two locks. Do not use the spacer
which may be provided with the key lock. The spacer (5) supplied with the mounting must be used in place of the spacers supplied with the
lock.
NOTE
Attach the lever (4) to the KIRK / Superior locks (6) with the screws supplied with the lock.
Attach the KIRK / Superior locks (6) together with the spacer (5) to the lock mechanism using the supplied screws.
For FS III only:
15 – 6
0709-1
1
2