Standard Specifications - Siemens UL 489 Operating Instructions Manual

3

Standard specifications

Hazardous voltage.
Will cause death, serious personal injury, or equipment/property damage.
Turn off and lock out all power supplying this equipment before working on this device.
Only qualified personnel should work on this equipment, after becoming thoroughly familiar with all warnings, safety
notices, and maintenance procedures contained herein and on the devices.
The successful and safe operation of this equipment is dependent on proper handling, installation, operation and 
maintenance.
Qualified Personnel
For the purpose of this instruction manual and these product labels, a
installation, construction and operation of the equipment and the hazards involved and who, in addition, has the following 
qualifications:
a) Is trained and authorized to energize, de-energize, clear, ground and tag circuits and equipment in accordance with
established safety practices.
b) Is trained in the proper care and use of protective equipment in accordance with established safety practices.
c) Is trained in rendering first aid.
The circuit breakers are suited for operation in enclosed spaces not subject to operating conditions aggravated by dust, corrosive vapors or
gases. Circuit breakers to be installed in dusty or damp locations must be appropriately enclosed.
The circuit breaker frame and the trip units are in conformity with the standards:
- UL 489
- NAVAL use according UL 489 Suppl. SB
- CSA C22.2 No. 5-02
The cradles are in conformity with the standards:
- UL 489
- CSA C22.2 No. 5-02
The accessories are in conformity with the standards:
- UL 489
- CSA C22.2 No. 5-02
The molded case switches are in conformity with the standards:
- UL 489
- CSA C22.2 No. 5-02
-
DANGER
qualified person is one who is familiar with the
" "
3 – 1