Installing The "Ready-To-Close" Switch S20 - Siemens UL 489 Operating Instructions Manual

12.2

Installing the "Ready-to-close" switch S20

Hazardous voltage.
Will cause death, serious personal injury, or equipment damage.
Turn off and lock out all power supplying this equipment before working on this device.
High speed moving parts.
Can cause serious personal injury.
Discharge the closing spring before inspection and before carrying out any work on the circuit breaker.
Snap-in mounting
The connecting wires from the "Ready-to-close" signaling switch must be connected to terminal X6 according to the wiring
"Ready-to-close" signaling switch S20
DANGER
WARNING
Signaling switches
S20
Catalog No.
WLRTCS
plan (page 8-2).
12 – 3