Closing Coil / Electrical Close - Siemens UL 489 Operating Instructions Manual

8.4

Closing Coil / Electrical CLOSE

CC
2)
CC S10 *)
CC
b
1)
*) Same installation location as S12
1) For circuit breaker equipped with shunt trip and closing coil, the combined cutoff- switch S14 / S15 will be used. (One switch NO + NC is serving both coils.)
2) Use twin wire end ferrule
Crimping tool e.g.: Weidmüller PZ3 to PZ6, WAGO Variocrimp 4
8 – 5