mangOH Red Getting Started page 30

mangOH Red Getting Started
Rev 2 8/23/17
3. Turn on the target's radio (modem);
# cm radio on
4. Display the status of the target's radio:
# cm radio
5. If the:
· Power is OFF—Turn on the radio and then repeat
# cm radio on
· Power is ON and Status is 'searching'—Wait 10–15 seconds while the radio
searches for a network to register on, then repeat
· Power is ON and Status is Registered—Continue to
30
Example response when
Power is OFF
Example response when
Power is ON, Status is Searching
Example response when
Power is ON, Status is Registered
Step 4:
Step 4.
Step 6.
41110481