mangOH Red Getting Started page 27

Rev 2 8/23/17
n
For now, type 3 and press Enter, then type Y and press Enter to be reminded
the next time you connect.
Note: After completing this tutorial, you should select an appropriate login authenti-
cation method (ssh keys or password) from this menu—see
latest/basicTarget.html
d. Display information about the CF3 module:
# cm info
n
e. Make note of your Firmware version, IMEI, and FSN. You will use all of these
in this guide.
f. Disconnect from the mangOH Red:
# exit
2. Go to https://source.sierrawireless.com
a. In the Devices section, click AirPrime.
b. Click WP series.
c. Click your module type.
d. In the Software download section, click Firmware to display the list of
available firmware packages.
e. In the Combined Images table, compare the Firmware version for the Generic
carrier with your module's firmware version:
· If your version is the same as the Generic version—The firmware does
not need to be updated. Continue to the next section
Legato Platform and mangOH Red Platform on
· If your version is lower than the Generic version—Continue to
update your firmware.
f. In the Binaries column for the Generic carrier, click Download.
g. Make sure the mangOH Red is connected to the dev machine with a
mini-USB cable.
27
for details.
IMEI
FSN
and do the following:
legato.io/legato-docs/
Firmware version
(Build and Install
Target).
Step f
41110481
to