Rev 2 8/23/17
3. Remove the protective film from the dipswitches:
4. Make sure the dipswitches are set as follows:
·
ON—1,3,8
·
OFF—2,4,5,6,7
5. Insert a micro-SIM in the slot on the bottom side of the mangOH Red. You can
use the Sierra Wireless micro-SIM that is included in the kit, or another micro-SIM
that has been activated by a mobile network provider.
Note: If you do not have an activated micro-SIM, you can still continue with the tutorial, but
will not be able to complete the following sections:
page 29
and
Connect to the IoT Cloud on page
Note the location of the notched corner.
11
Remove this film
Connect To Mobile Networks on
34.
Inserted in bottom part of slot
41110481