Installing Add-Ons; Introduction - Mitsubishi Electric Apricot LS Pro Using Setup And Installing Add-Ons

Installing add-ons

Introduction

Warning
Never carry out any work on the equipment with power
applied. Always switch off at the mains and remove the
power lead from the equipment before starting work.
This guide contains instructions on installing memory
upgrades, an 80387SX coprocessor, a thick wire Ethernet
module and a Token-Ring module RPL ROM. This
document should be your only source of information when
installing any of these.
Read this document before purchasing any upgrades. If,
having read the relevant instructions, you are not confident
about installing the upgrade, you may wish to have your
supplier or service organisation install it for you.
Before you start installing the upgrade you should be
thoroughly familiar with all the relevant instructions in this
guide and the appropriate sections of your Owner's
Handbook .
At the rear of this guide is some information about a
Token-Ring module upgrade, and a list of the SIMMs that
are approved for use with the Apricot LS Pro.
15