Demands On Technical Personnel - Fasel Elektronik FCU2000 Series Installation Instructions Manual

1.5

Demands on technical personnel

The assembly, installation, commissioning as well as rectification of defects and repairs
must be carried out by qualified persons only unless otherwise mentioned.
Inadequate
Qualification
Installation instructions Steam bath control Series FCU2000/FCU3000/FCU4000/FCU5000 M_FCUxxxx-Steam_EN / Version V2.04 7
WARNING!
Danger of injury due to inadequate qualification
Improper handling can lead to significant personal injuries and material
damage.
Therefore:
– The assembly, installation, commissioning as well as rectification of
defects, maintenance and repairs must be carried out by qualified
persons only unless otherwise mentioned.
Technical personnel
Due to their technical training, knowledge and experience as well as the knowledge
of the relevant regulations these persons are in a position to carry out the tasks
assigned to them and to identify possible dangers on their own. Also they are
familiar in handling with ESD sensitive devices.
Certified electricians
Due to their technical training, knowledge and experience as well as the knowledge
of the relevant standard specifications and regulations these experts are in a position
to carry out jobs on the electrical unit and to identify possible dangers on their own.
In Germany certified electricians have to fulfill the stipulations of the accident
prevention regulation BGV A3 (e.g. master electrician). In other countries
corresponding stipulations are applicable that have to be followed.
Safety