Fasel Elektronik FCU2000 Series Installation Instructions Manual page 23

Installation of Installation opening of the flush mounted socket for installation of the internal display:
the double flush
mounted socket
Fig. 9: M ounting hol e of the double flush mounted s oc ket
Electrical Connect the RJ45-connector of the internal display with a patch cable to the control
device.
Connection
Electrical
connection
diagram
Figure 10: Connection interior display
The electrical lines for FCU-EXT-DISPLAY(-TOUCH) und FCU-DESIGN are plugged on
top of each other in the Double-RJ45-Connector. Which lines will be put up or down
does not matter. Both sockets are the same.
Installation instructions Steam bath control Series FCU2000/FCU3000/FCU4000/FCU5000 M_FCUxxxx-Steam_EN / Version V2.04 23
1-2: Drill with box drill
3-4: Saw out the left standing center bars with a jigsaw
Removal of the keyboard FCUxxxx-Design