5.10.2
Overload capability
The possible output (continuous) power of the S120M strongly depends, as is generally the
case for motors, on the cooling power of the connection at the A flange. The minimum sizes of
the motor flange must be maintained in order to be able to achieve the maximum output data.
We recommend the "SIZER" engineering software to select a suitable S120M.
See SIZER: http://support.automation.siemens.com/WW/view/de/10804987/130000
Figure 5-21
Figure 5-22
Figure 5-23
Figure 5-24
Manual, 06/2019, 6SL3097-5AW00-0BP1
Duty cycle 2 x I
with/without base load (for servo drive)
rated
Duty cycle I
with base load
S6
Duty cycle 2 x I
with base load (for servo drive)
rated
Duty cycle I
with base load
max
S120M
5.10 Characteristics
103