Table of Contents
Advertisement
Replacing a fan in the AM600
①
②
③
Figure 9-4
Removal steps
1. Open the fan cover using a suitable tool
2. Open the fan cover
3. Withdraw the fan connector
4. Remove the fan cover together with the fan
Installation steps
1. Insert the new fan cover together with the fan
2. Insert the fan connector
3. Fold in the fan cover
Note
Checking the fastenings
● Attach the fan cover using a suitable slotted screwdriver or Torx screwdriver and check
Manual, 06/2019, 6SL3097-5AW00-0BP1
Fixing screws
Fan cover
Fan connector
Replacing a fan in the AM600
②
.
③
②
and secure it with the captive screws provided.
that the connections are secure.
Tightening torque: 1.8 Nm (15.9 lbf in )
①
(slotted screwdriver or Torx screwdriver).
③
(cable).
②
from the fastening lugs.
②
into the fastening lugs.
.
Service and maintenance
9.2 Replacing components
163
Advertisement
Table of Contents
