Regulating Low Flame - Bartscher 5FL EBO-1 Instruction Manual


When changing the jets, observe the following instructions:

remove the grill from the cooking
surface;

remove the burner shield from the
burner;

remove the jet using a 7 mm wrench;

replace the removed jet with one appropriate for the type of gas to be used (see
information in the "Jet and burner properties" table on pp. 44-45;

mount the burner and replace the burner shield over it;

Adapt all burners according to the above instructions;

When finished, replace the grills on the cooking surface;

5.1.6 Regulating low flame


After adaptation for another gas type, the low flame setting must be recalibrated
for each burner.

Perform the recalibration as follows:

ignite the burner;

turn the dial counter-clockwise to the
lowest flame setting (small flame symbol);

remove the regulation dial from
the valve.
1.
Grill
2.
Burner shield
3.
Burner
4. Thermal element
5. Safety valve
- 49 -