Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
HOT SURFACE! This symbol is a warning that the device surface is hot when in use. Ignoring this warning may result in burns! CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation.
Page 5
Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. Suffocation hazard! Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. ...
Page 6
Check the power cord regularly for damage. Do not use the appliance if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers. ...
Page 7
In case of a smell of gas immediately close all gas control knobs (set to “0“ position) and close the main gas valve. Do not use open flame! Do not smoke cigarettes! Do not activate any electrical switches! Do not use any electrical appliances! Do not make any phone calls from this building –...
Page 8
WARNING! Risk of fire or explosion! To avoid the hazard please follow the safety instructions below: Never use the device near flammable materials (e.g. petrol, spirits, alcohol). High temperature may cause their evaporation and as a result of contact with sources of ignition there may occur a deflagration resulting in personal injury or property damage.
1.3 Proper use The operational safety of the device is assured only in case of proper use, according to the operation manual. All technical activities like installation and maintenance must be performed by the qualified service personnel only. The device is not designed for continuous operation in the industrial applications. The device is intended for home use or in similar places such as: ...
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4.2 Technical specification Description Gas stove 5BR, EBO-1 1509951 Code-No.: Material: Chrome-nickel steel 18/10 Hobs: - Cast iron grates - Type: gas - Number of hobs: 5 (1 x 1 kW, 2 x 1.75 kW, 1 x 3 kW, 1 x 3.7 kW - Dimensions: 240 x 240 mm - Gas burner: 4 single burners outside, 1 double burner in the middle with ignition guard...
Page 14
Gas categories in selected countries Gas pressure Country Categories Gas type (mbar) Austria G20 - G30/G31 20 - 50/50 2H3B/P G20/G25 - Belgium 20/25 - 28-30/37 2E+3+ G30/G31 G20/G25 - Bulgaria 20 - 30/30 2H3B/P G30/G31 Switzerland G20 - G30/G31 20 - 28-30/37 2H3+ Cyprus...
Page 15
Gas pressure Country Categories Gas type (mbar) Romania G20 - G30/G31 20 - 30/30 2H3B/P Sweden G20 - G30/G31 20 - 30/30 2H3B/P Slovenia G20 - G30/G31 20 - 30/30 2H3B/P Slovakia G20 - G30/G31 20 - 30/30 2H3B/P Turkey G20 - G30/G31 20 - 30/30 2H3B/P...
Never place the device directly next to walls, furniture or other objects made of flammable materials. Keep a minimum distance of 150 mm from the side and rear walls. Keep a minimum distance of 600 mm between the upper surface of the device and surfaces located above it.
5.1.3 Electrical connections DANGER! Electric shock hazard! The device can cause injuries due to improper installation! Before installation and connecting the local power grid specification should be compared with that of the device (see rating plate). Connect the device only in case of compliance! ...
Connection with a metal hose Gas connection can be made with an appropriate hose complying with national standards, whereas the easily accessible certified gas shut-off valve must be installed between the gas installation and the device, to ensure that if necessary the gas supply could be quickly shut off.
When changing the jets, observe the following instructions: Grill Burner shield Burner Thermal element Safety valve remove the grill from the cooking surface; remove the burner shield from the burner; remove the jet using a 7 mm wrench; ...
Page 21
When adapting from liquid gas to natural gas, for proper regulation turn the screw (at the top left, as in the diagram) counter-clockwise with a small screwdriver until the desired flame strength is reached. When adapting from natural gas to liquid gas, for proper regulation turn the screw (at the top left, as in the diagram) clockwise with a small screwdriver until the desired flame strength is reached .
5.2 Tips for the user CAUTION! Carefully read this operation manual as it contains instructions for safety and operation of the device. Keep the operating manual handy, to allow access to it at any moment. The defective installation, operation errors and maintenance and cleaning mistakes as well as any modifications may cause the incorrect operation, damages and injuries.
5.2.2 Gas cooker Arrangement of gas burners on the cooking surface ① Quick burner ② Standard burner ④ Efficient burner ⑤ Triple ring Igniting burners To ignite a burner, press in on the appropriate dial and turn it counter-clockwise, to the high-flame symbol. ...
Place cookware so that the flame is in the middle. To reduce gas use and improve performance, use cookware with a diameter appropriate for a given burner as in the table below. min. ∅ (mm) max. ∅ (mm) Burner of cookware of cookware...
Page 25
Temperature regulation The temperature for cooking a particular dish is set using the temperature dial within a range of 60 °C – MAX. (approx. 250 °C). The red control light over the temperature dial comes on when the device is warming up, and goes off when the device has reached the desired temperature.
Page 26
Convection Temperature range: 60 °C – MAX. (approx. 250 °C) When this function is selected, hot air circulates evenly inside the oven on all levels, ensuring best results while cooking several dishes at one time on different levels. The oven must be preheated before dishes are placed inside. This function is especially appropriate for baking cakes and preparing larger amounts of food.
Page 27
CAUTION! When finished using the oven, return all dials (time, temperature and function) to the position marked "OFF". Levels The oven offers 4 levels: 1 lower, 2 middle, 1 upper. The middle levels are appropriate for most tasks, as this level offers stable temperatures matching the settings on the temperature dial.
6. Cleaning and maintenance WARNING! Before cleaning set the gas control knobs in “0” position and close the main gas valve. Set the temperature control knob in “0” position and disconnect the device from the power supply (pull the plug from the socket!). Leave the device to cool down completely.
Page 29
Glass oven door o In order to ensure better access to the cooking chamber for cleaning, the oven glass door may be removed (see above fig.). Follow the instructions below: open the oven glass door all the way; close the handle of both hinges towards the door; now, close the door until the hinges lift up out of their sockets in the oven;...
Instructions for maintenance o Inspect all of the device's control and safety mechanisms regularly. o Check the burner's ignition and its functioning at the lowest flame level. o Inspect the tightness of the gas installation's seals. o Regularly check whether the gas burner caps are lying flat and correctly on burner crowns.
CAUTION! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120...