AC Interface
AC Utility Terminals
153379
The AC Interface serves as the connection for the utility (see Figure 1-2 to locate
the AC Interface). This compartment (section) houses the AC Terminals (TB1-N,
-A, -B, and -C), AC Disconnect, AC Contactor, and EMI Filter. Additionally, the
Inrush PCB assembly, control power transformer, control fuses, and AC sensing
circuitry are also housed in this section.
Figure 1-3 AC Utility Terminals
Each terminal provides one hole with space for two cables with a M10 bore
diameter (see Table A-5 on page A–5 for torque requirements).
This manual for use by qualified installers only
Physical Characteristics
N
A
B
C
TB1
TB2
1–5