Operator Interface Controls; Figure 1-8 Gt100 Operator Interface Components - Xantrex GT100 Series Planning And Installation Manual

Operator Interface Controls

Operator interface controls are located on the left front door of the main Inverter
Enclosure. These controls include an ON/OFF Switch, 4-line VFD display and keypad
called the Universal Frontpanel Control Unit (UFCU) used to manipulate and view
system operation and status. The keypad is comprised of 20 touch-sensitive keys that
provide a means to navigate through the menus and alter user-changeable settings.
Additionally, there is an AC Disconnect switch handle and DC Disconnect switch handle
on the AC Interface door (left) and the DC Interface door (right) respectively.
VFD
Display
Universal
Frontpanel
Control (UFCU)
AC Disconnect
(CB1)

Figure 1-8 GT100 Operator Interface Components

153379
AC Interface
This manual for use by qualified installers only
Operator Interface Controls
DC Interface
On/Off
Switch
DC Disconnect
Switch (S1)
1–11