Programming (Changing) The Ice Portion - Cornelius IDC 255 PROGATE DRIVE THRU Operator's Manual

IDC 255 Progate Drive Operator's Manual

Programming (Changing) the Ice Portion

To change the size of any of the four ice dispense sizes follow the steps below.
1. To enter the program mode press the Program Button
the same time and hold for 5 seconds.
2. The Ice Portion Bar will come on
3. Press the UP ARROW button
towards the right indicating the Ice Portion has been increased.
4. Press the DOWN ARROW button
move towards the left indicating the Ice Portion has been decreased.
5. To exit the program mode press the Desired Size button
will return to the dispense mode.
6. Place a cup under the ice chute and press the just programmed dispense size button
amount dispense amount is not the desired amount repeat the process.
Publication Number: 621057419OPR
and Desired Size button
to increase the amount of dispensed ice. The LED will move
to decrease the amount of dispensed ice. The LED will
or wait 10 seconds and the control
- 10 -
at
If
© 2006, IMI Cornelius Inc.