Table of Contents
Advertisement
Image Stabilizer Settings
Set the image stabilizer operation to match the recording situation.
[
] / [
[Operation
Mode]
[E-Stabilization
(Video)]
]
Select [Stabilizer]
Sets the stabilization movement (blur) to match the recording
method (normal, panning). (206)
[HIGH]
[STANDARD]
[OFF]
Camera shake during video recording is corrected along
the vertical, horizontal, roll, pitch, and yaw axes through the
combined use of the in-lens and electronic image stabilizers.
(5-Axis Hybrid Image Stabilizer)
• If the recording screen icon is not indicated with [
[
] even when Panasonic interchangeable lens that
supports Dual I.S.2 is being used, update the lens firmware
to the latest version. For the latest information on supported
lenses or to download their firmware, refer to our support site.
(20)
• When using an interchangeable lens that does not support
Dual I.S.2 or when [Operation Mode] is set to [OFF], [
(Strong) or [
7. Drive/Shutter/Image Stabilizer
This will stabilize strong jitter. (Since the
stabilizing width is large, the angle of view is
narrowed.)
• [
] is displayed on the screen during video
recording.
This will stabilize jitter. (The angle of view may
become narrow.)
• [
] is displayed on the screen during video
recording.
This will turn off the electronic stabilization
(Video).
] (Standard) is displayed.
] or
]
205
Advertisement
Table of Contents
