Pylontech Extra 2000 Product Manual page 21

Extra 2000 Lithium Iron Phosphate Battery Backup Manual
DC backup power interface.
Multiple load equipment: use a division multiple power cords and the power cord
directly connected to each of the DC backup power load device interface.
Figure 3-4 Connection Diagram Interface between Battery and Load Equipment of
DC Backup Power
(2) Connection of the Battery and Switch Power
This installation method can be used when switching power supply to loads.
Installing the battery power cord priority access battery interface first; if switching
power supply without a battery interface, the power line can also be inserted
interface of load power supply, it should pay attention to that maximum load
current should be greater than the maximum discharge current of relevant battery
in Table 2-7.
Figure 3-5 Battery and Switch Power Connection Diagram
Pylon Technologies Co., Ltd. Confidential Proprietary 15