Equiment Installation; Mechanical Installation; Electrical Installation - Pylontech Extra 2000 Product Manual

Extra 2000 Lithium Iron Phosphate Battery Backup Manual

Wiring
Ensure the power cord and ground wiring is reasonable. No short circuit,
water and corrosion.
3.2 Equipment Installation
Table 3-2 Installation Steps
Step 1
Step 2
Step 3

3.2.1 Mechanical Installation

Before installation, disconnect the entire device's power directly contact, and
recognizing that the battery is turned off (disconnect the battery power cord and
press the Reset button), to ensure there is no electrification.
1 Tab Installation
There are tabs and mounting accessories equipment box. Before the equipment
fixed, install tabs on both sides of the device, and confirm screws are tightly
connected.
2 Equipment Installation
Extra 2000 products using 19-inch rack-mountable, it can be installed in the
Pylon Technologies Co., Ltd. Confidential Proprietary
system
powered down
Mechanical
Installation
Electrical
Installation
1. Tab Installation
2. Equipment Installation
1. Connecting
Grounding Cable.

2. Electrical Installation

3. Connect the Load
4. Communication
Interface Cascade
5. Communication
Interface Collection
6. Power Supply
12