Pylontech Extra 2000 Product Manual page 19

Extra 2000 Lithium Iron Phosphate Battery Backup Manual
chassis designed with battery, and also be installed in the cabinet. Put device in
parallel on the pallet rack, push it into the cabinet to make a very tight against
between tab and the mounting bracket, tighten with screws and floating nuts, it
must be ensure that all devices are secure. The position is flexible according to the
actual for arrangements device in a cabinet.
Figure 3-2: Schematic of Device Fixed to the Cabinet
3.2.2 Electrical Installation
Before connecting power and landing, using multimeter to measure cable
continuity, short circuit, and confirmed anode and cathode, and make the cable
labels.
Measuring methods:

Cable continuity: Select buzz file of multimeter with a probe touch the ends
of the same color cable, if buzzer means cable is available.

Short circuit: Select resistance profile of multimeter, with a probe measuring
the same anode and cathode, if the resistance displayed infinite, means
cable is available.

Anode and cathode: after power cord connected, the battery positive and
negative should be connected respectively positive and negative of
equipment.
Cables connection order:
1 Ground Cable
Pylon Technologies Co., Ltd. Confidential Proprietary 13