Pylontech Extra 2000 Product Manual page 10

Extra 2000 Lithium Iron Phosphate Battery Backup Manual
ADD Switch (5)

ADD Switch: 4 ADD switches, to definite different address code for each
battery module when network cascade multiple battery, up to 8 addresses.
The coding and description see "Table 2-3 ADD Switch."
Table 2-3 ADD Switch
Coded Bit
1 2
ON OFF
OFF ON
ON ON
OFF OFF
Note:
The coded bits 1 to 4 in table separately represent ADD keys from left to right. (set up for
the "ON", down to "OFF"). The address of each device in accordance with the binary
coded bits, 1 is low, 4 is high, Table 2-3 Example 1-4 address coding, 5-8 address and
so on. If several Extra products cascading multiple network devices, the address
encoding 1 is the main battery, others are assistants.
LED Status Indicators (6,7,8)

RUN Lamp (No.6 Figure 2-1): green, long lighting when charging and flash
when discharging;

ALM Lamp (No. 7 Figure 2-1 7): red, flashes when alarm and long bright if
equipment failure or protected;

Battery capacity indicator (No. 8 Figure 2-1): 4 green lamps, each light
represent 25% of capacity. The four lights lit when capacity is 100%, if 75%,
the first left a lamp off, and the right three lights; if 50%, the left two lights out,
the right two lights; if 25 %, the left three lights off, the right one lights.
Table 2-4: LED Indicators Instructions
Battery Protection
Statues / Alarm /
Pylon Technologies Co., Ltd. Confidential Proprietary
3 Veneer Sends, Computer Receives
4 Land
Address
3 4
OFF OFF (1)
OFF OFF (2)
OFF OFF (3)
ON OFF (4)
RUN ALM
Pack
Master Pack, Corresponding with
Pack1
Pack2 Slave Pack1
Pack3 Slave Pack2
Pack4 Slave Pack3
Capacity LED
s
Description
RS232
Description
4