Power Off Your System And Open The System Unit.; Locate The Dimm Slots On The Motherboard.; Unpack The Dimm, Holding It Only By The Edges. - Sun Microsystems Netra T1 AC200 Installation Manual

Dimm installation guide

Hide thumbs Also See for Netra T1 AC200:

Table of Contents

1. Power off your system and open the system unit.

Remove the top cover by following the procedure described in the

Netra T1 AC200 and DC200 Server User's Guide (part number 806-

5978-10). Make sure you disconnect all power cables and wear an

antistatic wrist strap.

2. Locate the wrist strap, and attach its adhesive copper strip to the

metal casing of the power supply. Wrap the other end twice

around your wrist with the adhesive side against your skin.

3. Locate the DIMM slots on the motherboard (see Figure 1-2).

Figure 1-1

Unpacking the DIMMs

Table of Contents

Do you have a question about the Netra T1 AC200 and is the answer not in the manual?

Netra t1 dc200