Pepperl+Fuchs KFD HM 16 Series Manual page 45

HART Multiplexer System KFD*-HM*-16
Configuration
The HART Scan is started by means of the Start button in the right lower corner.
Now the topology of the connected devices is built by reading in the field devices
connected to these devices by means of HART Multiplexer and HART Slaves.
•
•
•
Figure 6.16 Start HART Scan function
First of all, the activated Slaves are added now.
After a Slave has been added, the individual loops are scanned, and the field
devices found are automatically added to the structure.
Some manufacturers have various DTMs for the same device family. In this case
the correct DTM has to be chosen from the selection.
45