Pepperl+Fuchs KFD HM 16 Series Manual page 30

HART Multiplexer System KFD*-HM*-16
Configuration
Project window
Edit window
Note
30
The main window is divided into the project window and the edit window.
The current project tree for your system is constructed in the project window by
adding the various components. Three buttons for adding, removing and editing
components appear at the bottom of the window. Select the device you wish to edit,
monitor, diagnose or simulate in the project manager. The selected object will be
highlighted in different color.
Various windows which are required for editing your system appear in the edit
window. The edit process begins with the appearance of the selection window
containing the drives and devices or the device catalog for setting up the system.
The configuration and parameterization tabs for the drives and devices also appear
in the edit window. During subsequent operation, the diagnostic, measured variable,
trend and simulation menus appear in the edit window. The communication monitor
for the communication protocol can also be opened in this window.
For more information to PACTware
Automation Configuration Tool" manual.
In conjunction with the DTMs for HART Multiplexer, it is advisable to activate the
Memory-Optimized Operation option.
Activate Memory-Optimized Operation
 Open the Options menu via Device > Extras > Options.
 Activate the Memory-Optimized Operation option.

The Online-Parameter window is indicated.
TM
, please refer to the "PACTware
TM
Process