HART Multiplexer System KFD*-HM*-16
Configuration
6.6.3
HART Scan
Note
Use a HART Scan to read in the entire project structure connected to the serial
interface:
•
HART Multiplexer Master
•
HART Multiplexer Slaves
•
Field devices
Start HART Scan function
Select the Multiplexer Master in the project window.
Start the HART Scan via Device > Additional functions > HART Scan.
The HART Scan window is indicated.
Figure 6.12 Activate HART Scan function
The HART scan function might not be supported by all frames or underly some
limitations.
41