Setting The Parameters Of The Hart Multiplexers - Pepperl+Fuchs KFD HM 16 Series Manual

HART Multiplexer System KFD*-HM*-16
Configuration
6.6

Setting the parameters of the HART Multiplexers

6.6.1 Parameterizing parameters off-line
34
Adjust the parameter of the Master
 Double-Click in the project window with mouse button on Multiplexer.
 Open the Master menu.

The Master window is indicated.
The following parameters are adjustable:
• RS485 address: The RS485 address of the HART Multiplexer is set here.
• Long-Address: The distinct unchangeable long address of the HART Multiplexer
is set here.
• Master-Type: One HART loop may include two Masters whereby the
parameterization has to be set to differentiate between primary Master and
secondary Master. These settings have to be carried out here.
Figure 6.5 Multiplexer Parameter window