HART Multiplexer System KFD*-HM*-16
Configuration
6.5
Adding the HART Multiplexer
Note
In the Communications DTM, the function Additional functions > Scan list can be
used to scan the connected HART Multiplexer.
Update Scan list
Click in the project window with right mouse button on HART Communication.
Select Additional Function in the context menu.
Select Scan list.
Start the scan with Refresh.
Figure 6.4
HART Communication window, Scan list
At present, the addresses 0 ... 15 only are supported. Future versions will however
support the entire address range from 0 ... 31.
Adding the HART Multiplexer
The HART Multiplexers now have to be manually added to the project.
Use drag-and-drop to drag the suitable DTM from the device catalog to the HART
Communication DTM.
or
Click in the project window with right mouse button on HART Communication.
Select Add Device in the context menu.
Select the DTM KFD2-HMM-16 in the list.
The Communications DTM is in the project.
33