Advertisement
KNX
Push button sensor 3
Mounting and connecting the device
(4) Bus coupler 3
(5) Frame
(6) Push button sensor
(7) Retaining screw
(8) Inscription panel
(9) Rocker cover
(10) Programming button and LEDs
(11) Anchor
(12) Fastening screws
(13) Central bar for double frame without central bar
The bus coupler 3 is connected to the bus and mounted in an appliance box.
i Use only bus coupler 3 – without a programming button. It is not possible to combine it with
other bus couplers.
32574912
10410684
Figure 2
Figure 3
24.02.2016
3/5
Advertisement
