Rack Stability - Compaq Evo W8000 Hardware Reference Manual

Rack Stability

© 2001 Compaq Computer Corporation
Compaq, the Compaq logo, Evo, and INSPECT are trademarks of Compaq
Information Technologies Group, L.P.
Microsoft, Windows, and Windows NT are trademarks of Microsoft
Corporation in the United States and other countries.
All other product names mentioned herein may be trademarks of their
respective companies.
Compaq shall not be liable for technical or editorial errors or omissions
contained herein. The information in this document is provided "as is" without
warranty of any kind and is subject to change without notice. The warranties
for Compaq products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as
constituting an additional warranty.
WARNING: Text set off in this manner indicates that failure to follow
directions could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow
directions could result in damage to equipment or loss of information.
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizing feet are attached to the rack in a single-rack installation.
The racks are coupled together in multiple-rack installations.
A rack may become unstable if more than one component is extended at
a time, for any reason.
Extend only one component at a time.
Compaq Evo Workstation W8000
Hardware Reference Guide
Second Edition September 2001
Document Part Number: 221474-002