Water Separator Removal And Installation - Mitsubishi 6M70 Workshop Manual

WATER SEPARATOR
Tightening torque (Unit: N·m {kgf·m})
Mark
Fuel cut valve
Plug A
Plug B
Drain plug
Cover
Connector
Lubricant and/or sealant
Mark
O-ring
Special tools
Mark
Filter wrench
13-80
Parts to be tightened
Points of application
Tool name and shape
Disassembly sequence
1 Fuel hose
2 Fuel cut valve
3 Connector
4 Plug A
5 O-ring
6 Plug B
7 O-ring
8 Drain plug
9 O-ring
10 Cover
11 O-ring
12 Float
13 Element
14 Body
: Non-reusable parts
Assembly sequence
Follow the disassembly sequence in re-
verse.
WARNING
• Fuel is highly flammable. Keep it
away from flames and sources of
heat.
• Thoroughly wipe up any spilled fu-
el. Otherwise, it may catch fire.
CAUTION
• Be careful not to damage the case.
Tightening torque
35 {3.6}
12.3 ± 2.5 {1.3 ± 0.3}
17.2 ± 2.5 {1.8 ± 0.3}
1.47 ± 0.3 {0.15 ± 0.03}
19.6 ± 2.5 {2.0 ± 0.25}
40 {4.0}
Specified lubricant and/or sealant
Engine oil
Part No.
MH063201 Removal and installation of cover
Remarks
–
–
–
–
–
–
Quantity
As required
Application