Mitsubishi 6M70 Workshop Manual page 203

Lubricant and/or sealant
Mark
O-ring
Special tools (Unit: mm)
Mark
Injector extractor
adapter
Nozzle extractor
A
M8 × 1.25
Open end spanner
A B
15 24
Removal procedure
Mitsubishi 6M70 Engine Parts contact:
email: EngineParts@HeavyEquipmentRestorationParts.com
Phone: 269 673 1638
Points of application
Tool name and shape
•
CAUTION
• Do not use
Specified lubricant and/or sealant
Part No.
ME165088
MH061071
ME355665
Removal: Mitsubishi 6M70 Injection pipe
Apply (width across flats: 15 mm) to the connector of the
injector as a stopper, and then loosen the union nut to remove
the injection pipe.
except for a stopper of the injection pipe,
otherwise the open end section may be broken.
Engine oil
Application
Removing injector
(use with MH061071)
Removing injector
Removal and installation of injection
pipe
13
Quantity
As required
13-71