TROUBLESHOOTING <DIAGNOSIS USING Multi-Use Tester>
1. Diagnosis Procedure
• Perform the inspection in accordance with the following flowchart.
Warning lamp lit
Vehicle in service shop
Read all (past and present) diagnosis codes by Multi-Use Tester. (See Gr00.)
Perform inspection based on diagnosis codes. (See later section.)
NO
Response to transient fault
Was able to identify the fault?
(See Gr00.)
YES
Rectify or replace with new parts.
Clear stored diagnosis code. (See Gr00.)
Test drive
Code issued
Read diagnosis code(s) by Multi-Use Tester. (See Gr00.)
No code issued
End of inspection
13-26