Mitsubishi 6M70 Workshop Manual page 312

Tightening torque (Unit: N·m {kgf·m})
Mark
Bolt (bracket mounting)
Clamp bolt
Bolt (clamp plate mounting)
Lubricant and/or sealant
Mark
Threads of clamp bolt
Threads of mounting bolt
O-ring
Work before removal
Removal procedure
Mitsubishi 6M70 Engine Parts contact:
email: EngineParts@HeavyEquipmentRestorationParts.com
Phone: 269 673 1638
Parts to be tightened
Points of application
• Put alignment marks on the coupling, turbine housing, compres-
• Remove the flange and nozzle in one unit from the turbine hous-
• Remove the clamp bolt, then remove the nozzle from the flange.
Tightening torque
34 to 38 {3.5 to 3.9}
6.4 to 7.4 {0.65 to 0.75}
25.5 to 27.4 {2.6 to 2.8}
Specified lubricant and/or sealant
Seizure preventive compound
(FEL-PRO CA-5)
Alignment mark
sor cover and cartridge assembly.
Removal: Nozzle
ing.
Engine oil
15
Remarks
Wet
Wet
Wet
Quantity
As required
As required
15-39