Table of Contents
Advertisement
4
4.1
© Martin Engineering GmbH
Installation
Safety Instructions
NOTE
Read this chapter thoroughly prior to commencing any work!
WARNING! DANGER OF INJURY!
Body parts and/or clothing may get caught and pulled in by rotat-
ing parts or by the moving conveyor belt.
Before any installation or maintenance work is carried out, ensure
that all power sources to the conveyor belt system and its acces-
sories are switched off and secured against inadvertent switching-
on. Use warning signs!
WARNING! EXPLOSION HAZARD!
In enclosed areas there is an increased risk of explosion when
using a cutting torch or welding equipment!
Before use, check the level of gas and dust in the air.
NOTE
The chute wall on which the spring tensioner shall be installed is
referred to as 'operator side'. The other chute wall is called the
'opposite side'.
When installing dual spring tensioners, the most accessible side is
the "operator side".
13
M3618UK-11/14
Advertisement
Table of Contents
