Symptom
Noises or vibrations.
Corrosion or chemical
degradation.
Tab. 4: Troubleshooting
© Martin Engineering GmbH
Cause
The scraper is fixed either
too loosely or too tightly
against the conveyor belt.
The urethane of the cleaner
blade may not be suitable
for the application.
The urethane of the cleaner
blade may not be suitable
for the application.
29
Corrective action
Adjust the tension if necessary.
Contact Martin Engineering or an
authorised dealer.
Contact Martin Engineering or an
authorised dealer.
M3618UK-11/14