Using The Safety Instructions; Safety Instructions - Structure; Explaining Signal Words And Safety Alert Symbol - Bosch Rexroth IndraControl VR 21 Series Operating Instructions Manual

VR 21
Six mounting brackets including tool
●
24 V female connector strip
●

3 Using the Safety Instructions

3.1 Safety Instructions – Structure
The safety instructions are structured as follows:
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig. 3-1: Safety instructions – Structure

3.2 Explaining Signal Words and Safety Alert Symbol

The safety instructions in this documentation contain specific signal words (dan-
ger, warning, caution, notice) and, if necessary, a safety alert symbol (according
to ANSI Z535.6-2006).
The signal word is meant to draw the reader's attention to the safety instruction
and signifies the degree of danger.
The safety alert symbol (a triangle with an exclamation point), which precedes
the signal words danger,warning and caution is used to alert the reader to per-
sonal injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury
can occur.
DOK-SUPPL*-VR21**.01**-IT02-EN-P
Safety alert symbol
Signal word
Burns and chemical burns due to wrong
battery treatment!
Avoiding danger
Bosch Rexroth AG
Using the Safety Instructions
Consequences and
source of danger
3/29