Table of Contents
Advertisement
Install Chassis in Rack
Caution: Lifting the chassis and attaching it to the rack is a two-person job. If needed, use an
appropriate lifting device. A fully loaded server weighs approximately 11.8 kg (26 lbs).
!
1.
Locate one person at the front of the rack and one at the rear.
2.
Position the chassis so that the L brackets (Figure 12, A) are inserted into the chassis mounting brackets (B).
3.
While supporting the weight of the chassis, adjust the L brackets to fit tightly into the chassis brackets (C).
Figure 12. L Brackets Inserted into Chassis Mounting Brackets (Rear View)
4.
Slide the chassis toward the rear of the rack until the front of the chassis mounting brackets contact the front of
the center posts.
5.
Using the screws (Figure 13, C) supplied with your rack, attach the front of the mounting brackets to the front of
the center posts.
You have completed the mid-mount installation of your chassis in a two-post rack system.
B
User Guide—Sun Cobalt LX50 Server
Installing the Server Using the Bracket Kit
A
C
2-13
Advertisement
Table of Contents
