Cisco 8800 Series User Manual page 13

Make a Call with a Speed-Dial Code
Before you begin
Set up speed-dial codes on the phone web page or from your phone's Applications menu.
Procedure
Enter the speed-dial code and press Call.
Configure a Speed Dial on a Line Key
You can press any idle line key on your phone and set up speed dial on it. The speed-dial icon, the name, and the
extension number are displayed on your phone screen next to the line key. You can also verify this change by
checking the Extended Function field on the web page. After you configure the speed dial on a line key, you can
press the line key to modify the speed-dial information and assign a new phone number and name. You can press
the line key that has speed-dial configured to speed dial a number.
You can configure your key expansion module line key as a speed dial key and you can press that line key to
speed dial a number. Your administrator configures the key expansion module line key as a speed dial key from
the phone web page.
Procedure
Step 1 Press any idle line key on your phone for at least two seconds.
Step 2 In the Speed-Dial window, add the speed-dial name and phone number to call when you press this line
key.
Step 3 Click Save.
Remove a Speed Dial from a Line Key
You can press a line key on your phone and delete speed dial assigned to it. The speed dial on the line key is
removed. Check the phone web page to confirm that the speed dial is removed.
Procedure
Step 1 Press a line key that has a speed dial configured for at least two seconds.
Step 2 Press Option > Delete in the Speed-Dial window on the phone screen.
Use the Line in Focus for Speed-Dial Calls
You can configure a line key to perform a speed dial either with a Voice Profile ID (VID) or without a VID. When
both are configured, VID has a higher priority. The call is routed to that line.
If a line key is configured without VID, you can configure a speed-dial key to use the line in focus.
Procedure
13 | P a g e
Cisco IP Phone 8800 Series User Guide