Transfer Calls - Cisco 8800 Series User Manual

Step 4 Press 1.
Step 5 When prompted, enter the destination phone number, starting with a 1, i.e. 1 800 555 1212.
Disable Call Forward – No Answer
Procedure
Lift the receiver and listen for dial tone
Step 1
Press *92
Step 2
When prompted, enter your PIN.
Step 3
Step 4 Press 2.
Enable Call Forward – Out of Service
Procedure
Lift the receiver and listen for dial tone
Step 1
Press *94
Step 2
When prompted, enter your PIN.
Step 3
Step 4 Press 1.
Step 5 When prompted, enter the destination phone number, starting with a 1, i.e. 1 800 555 1212.
Disable Call Forward – Out of Service
Procedure
Lift the receiver and listen for dial tone
Step 1
Press *94
Step 2
When prompted, enter your PIN.
Step 3
Step 4 Press 2.

Transfer Calls

You can transfer an active call to another person.
Transfer a Call to Another Person
When you transfer a call, you can stay on the original call until the other person answers. This gives you an
opportunity to talk privately with the other person before you remove yourself from the call. If you don't want to
talk, then transfer the call before the other person answers.
You can also swap between both callers to consult with them individually before you remove yourself from the
call.
Procedure
Step 1 From a call that is not on hold, press Transfer
Step 2 Enter the other person's phone number.
Step 3 (Optional) Wait until you hear the line ring or until the other person answers the call.
18 | P a g e
.
.
.
.
.
.
.
Cisco IP Phone 8800 Series User Guide