Sub-Zero Manual page 59

The back sides of rails and stiles that will be
visible through the glass door will need to be
finished. Also, the inside edges of the frames
must be finished to match the front surface.
As with the Sub-Zero Built-In models, you have
the flexibility of ordering grilles in a variety of
heights for the overlay application. Overlay grille
panel dimensions for the overlay Model I430,
standard 279 mm grille, are listed below. Refer
to page 23 for optional grille height dimensions.
The width of the overlay grille, spacer and
backer panel will be the same regardless of the
height.
C A B I N E T R Y D I M E N S I O N S
Model I430
762 mm
722 mm
DOOR FRAME
2134
mm
1727 mm
DOOR
PANEL
CENTERED
VERTICALLY
103 mm
FRONT VIEW
NOTE: 13 mm ADJUSTMENT IN LEVELING LEGS
In addition, side panel information for a Model
I430 is available on page 21 of the Built-In
section. Refer to illustration 11 on page 21 for
placement of toe kick and grille area cut-outs.
O V E R L A Y P A N E L S P E C I F I C A T I O N S
Model I430 – Overlay (O)
Overlay Door Panel Width
Overlay Door Panel Height
Spacer Panel Width
Spacer Panel Height
Backer Panel Width
Backer Panel Height
Min Width of Rails and Stiles
Door Frame Panel Weight Limit
Min Panel Thickness
G R I L L E P A N E L S P E C I F I C A T I O N S
Model I430 – Overlay (O)
Overlay Grille Panel Width
Overlay Grille Panel Height*
Spacer Panel Width
Spacer Panel Height*
Backer Panel Width
Backer Panel Height*
Grille Panel Weight Limit
TOE
Min Panel Thickness
KICK
SIDE VIEW
*Grille panel dimensions are for standard 279 mm
grille. Refer to page 22 for optional grille heights.
I N S T A L L A T I O N
To install overlay
panels, see the
detailed procedures
outlined in the
Sub-Zero Wine
Storage Installation
Guide.
722 mm
1727 mm
699 mm
1073 mm
714 mm
1719 mm
57 mm
11 kg
16 mm
722 mm
260 mm
699 mm
236 mm
714 mm
252 mm
7 kg
16 mm
59