Wine Storage - Sub-Zero Manual

U N D E R C O U N T E R
606 mm
864
mm
M O D E L I 4 2 4
Built-In
A L L W I N E S T O R A G E
686 mm
2032
mm
M O D E L I 4 2 7
Integrated
W I N E S T O R A G E
686 mm
2032
mm
M O D E L I 4 2 7 R
Integrated
The illustrations represent the full line of
Wine Storage models. The Model I424FS
free-standing unit comes with a classic
stainless steel exterior.
Comprehensive installation instructions are
shipped with each model. Refer to those
instructions in preparing and installing all
Sub-Zero products. The instructions can
also be found on our website,
subzero.com.
46
616 mm
868
mm
M O D E L I 4 2 4 F S
Free-Standing
762 mm
2134
mm
M O D E L I 4 3 0
Built-In
|
R E F R I G E R A T O R
With the installation of a harness
kit, Wine Storage models are
Star-K compliant to meet strict
religious regulations in conjunction
with specific instructions found on
www.star-k.org. For details about
the harness kit, contact your
Sub-Zero dealer.
W I N E S T O R A G E
Sub-Zero's innovative addition to its complete
line of residential refrigeration is wine storage
equipment—the ultimate in beauty, engineering,
and attention to detail. From the exterior and the
smooth lines of the free-standing Model I424FS
classic stainless steel to the ability to use wood
on the Built-In and Integrated models, each unit
is beautiful.
With the exception of the free-standing Model
I424FS, each model will have the capability of
having wood panels applied to the doors. With
the Model I427R, you can also apply the wood
to the drawers.
The free-standing Model I424FS does not require
any panels or surrounding cabinetry; it comes
with classic stainless steel exterior.
All models will be shipped with glass doors as
standard equipment. The glass doors allow one
to see the wine that is being stored.
Stainless steel models will be shipped with
tubular stainless steel handles, while the overlay
models will come with no handle hardware.
Accessory overlay handles are available. Optional
stainless steel panels and handles for Models
I427 and I427R are offered in the classic stain-
less steel finish and are ordered and shipped as
sales accessories.
Standard grille assemblies for the Model I430
will be provided in 25 mm increments from 254
mm to 381 mm. The standard height will be 279
mm. The overlay model will have the panel grille,
which accepts decorative panel inserts.
For information regarding specific Wine Storage
models, refer to the illustrations in this section.